Ignition Coil: Service and Repair

Ignition Coil Replacement (LE5 , LE9, or LAF)

Removal Procedure




1. Remove the air cleaner outlet duct. Refer to Air Cleaner Outlet Duct Replacement (Air Cleaner Outlet Duct Replacement).
2. Disconnect the engine wiring harness electrical connectors (1) from the ignition coil(s) (2).




3. Remove the ignition coil bolt(s).
4. Remove the ignition coil(s).

Installation Procedure




1. Install the ignition coil(s).

Caution: Refer to Fastener Caution (Fastener Caution).

2. Install the ignition coil bolt(s) and tighten to 10 Nm (89 lb in).




3. Connect the engine wiring harness electrical connector(s) (1) to the ignition coil(s) (2).
4. Install the air cleaner outlet duct. Refer to Air Cleaner Outlet Duct Replacement (Air Cleaner Outlet Duct Replacement).