Driver or Passenger Seat Back Cushion Latch Release Lever Bezel Replacement

Driver or Passenger Seat Back Cushion Latch Release Lever Bezel Replacement

Removal Procedure





1. Slide a flat bladed tool or a finger it between the handle bezel (1) and cushion cover until you can push the bezel bottom snap up to unlatch it from the handle housing.





2. Gently pull upward on the bottom of the bezel (1) and then pull downward on the bezel ever so slightly to separate the bezel from the two upper handle housing teeth.





3. Slide the bezel (1) out until it's completely removed from the handle housing and seat.

Installation Procedure





1. Install the bezel (1) bottom snap into the handle housing locator hole.

2. Push forward on the top of the bezel to lock the two upper handle housing teeth into the top bezel locator holes.