Scheduled Maintenance
Maintenance Schedule
Owner Checks and Services
At Each Fuel Stop
^ Check the engine oil level.
Once a Month
^ Check the tire inflation pressures.
^ Inspect the tires for wear.
^ Check the windshield washer fluid level.
Engine Oil Change
When the CHANGE ENGINE OIL SOON message displays, have the engine oil and filter changed within the next 1 000 km/600 mi. If driven under the best conditions, the engine oil life system might not indicate the need for vehicle service for more than a year. The engine oil and filter must be changed at least once a year and the oil life system must be reset. Your trained dealer technician can perform this work. If the engine oil life system is reset accidentally, service the vehicle within 5 000 km/3,000 mi since the last service. Reset the oil life system when the oil is changed.
Tire Rotation and Required Services Every 12 000 km/7,500 mi
Rotate the tires, if recommended for the vehicle, and perform the following services.
Check engine oil level and oil life percentage. If needed, change engine oil and filter, and reset oil life system. Refer to Service Reminder Indicators.
Check engine coolant level.
Check windshield washer fluid level.
Visually inspect windshield wiper blades for wear, cracking, or contamination. Replace worn or damaged wiper blades.
Check tire inflation pressures.
Inspect tire wear.
Visually check for fluid leaks.
Inspect engine air cleaner filter. Inspect or replace the air cleaner/filter at the scheduled maintenance intervals. If driving in dusty/dirty conditions, inspect the filter at each engine oil change.
Inspect brake system.
Visually inspect steering, suspension, and chassis components for damaged, loose, or missing parts or signs of wear.
Check restraint system components. Now and then, check that the safety belt reminder light, safety belts, buckles, latch plates, retractors, and anchorages are all working properly. Look for any other loose or damaged safety belt system parts that might keep a safety belt system from doing its job. Torn or frayed safety belts may not protect you in a crash. They can rip apart under impact forces. If a belt is torn or frayed, get a new one right away. Make sure the safety belt reminder light is working. Keep safety belts clean and dry.
Visually inspect fuel system for damage or leaks.
Visually inspect exhaust system and nearby heat shields for loose or damaged parts.
Lubricate body components. Lubricate all key lock cylinders, hood hinges, liftgate hinges, and the steel fuel door hinge unless the components are plastic. Applying silicone grease on weatherstrips with a clean cloth will make them last longer, seal better, and not stick or squeak.
Check starter switch. Starter Switch Checks
Check automatic transmission shift lock control function. Automatic Transmission Shift Lock Control Function Check
Check ignition transmission lock. Ignition Transmission Lock Check
Check parking brake and automatic transmission park mechanism. Park Brake and P (Park) Mechanism Check
Check accelerator pedal for damage, high effort, or binding. Replace if needed.
Visually inspect gas strut for signs of wear, cracks, or other damage. Check the hold open ability of the strut.
Check tire sealant expiration date, if equipped.
Inspect sunroof track and seal, if equipped. Dirt and debris may collect on the sunroof seal or in the track. This could cause an issue with sunroof operation or noise. It could also plug the water drainage system. Periodically open the sunroof and remove any obstacles or loose debris. Wipe the sunroof seal and roof sealing area using a clean cloth, mild soap, and water. Do not remove grease from the sunroof.
SPECIAL APPLICATION SERVICES
Severe Commercial Use Vehicles Only:
Lubricate chassis components every 5 000 km/3,000 mi.
Have underbody flushing service performed once a year. Use plain water to flush dirt and debris from the vehicle's underbody. If not removed, rust and corrosion can develop.
MAINTENANCE SCHEDULE ADDITIONAL REQUIRED SERVICES - NORMAL
Footnotes - Maintenance Schedule Additional Required Services - Normal
a) Or every two years, whichever comes first. More frequent replacement may be needed if the vehicle is driven in areas with heavy traffic, areas with poor air quality, or areas with high dust levels. Replacement may also be needed if there is a reduction in air flow, excessive window fogging, or odors.
b) Check all fuel and vapor lines and hoses for proper hook-up, routing, and condition. Check that the purge valve, if the vehicle has one, works properly. Replace as needed.
c) Or every four years, whichever comes first.
d) Or every five years, whichever comes first.
e) Or every 10 years, whichever comes first. Inspect for fraying, excessive cracking, or damage; replace, if needed.
MAINTENANCE SCHEDULE ADDITIONAL REQUIRED SERVICES - SEVERE
Footnotes - Maintenance Schedule Additional Required Services - Severe
a) Or every two years, whichever comes first.
b) Check all fuel and vapor lines and hoses for proper hook-up, routing, and condition. Check that the purge valve, if the vehicle has one, works properly. Replace as needed.
c) Or every four years, whichever comes first.
d) Or every five years, whichever comes first.
e) Or every 10 years, whichever comes first. Inspect for fraying, excessive cracking, or damage; replace, if needed.