Transmission Fluid Drain and Fill

Transmission Fluid Drain and Fill

Draining Procedure





1. Raise and suitably support the vehicle. Refer to Lifting and Jacking the Vehicle Service and Repair

2. Clean away all dirt and debris from the transmission drain plug area (1).

3. Place a suitable drain pan under the transmission.

4. Remove the drain plug (1).

5. Allow the system to drain.

Caution:
Refer to Fastener Caution Fastener Caution.

6. Install the transmission drain plug (1) and tighten to 27 Nm (20 lb ft).

Filling Procedure





1. Clean away all dirt and debris from the transmission fluid fill plug area.

2. Remove the transmission fluid fill plug (4).

3. Fill the transmission with the recommended transmission fluid, until even with the bottom of the fill plug hole.

4. Install the transmission fluid fill plug and tighten to 27 Nm (20 lb ft).

5. Remove the drain pan.

6. Lower the vehicle.