Operation CHARM: Car repair manuals for everyone.

64. Oil Pan Cleaning and Inspection




Oil Pan Cleaning and Inspection (6.2L LS3)





1. Remove the oil filter fitting (1), as required.





2. Clean the oil pan in solvent.

Warning:
Refer to Safety Glasses Warning Safety Glasses Warning.


3. Dry the oil pan with compressed air.

4. Inspect the oil pan for the following conditions:

* Damaged gasket surfaces (1)

* Restrictions within the oil passages (2) of the pan

* Damaged oil filter seal surface (3)

* Threaded bolt holes (4) for damage





Caution:
Refer to Fastener Caution Fastener Caution.

5. Install the oil filter fitting (1), as required, and tighten to 55 Nm (40 lb ft).