Seat Position Sensor: Service and Repair

Inflatable Restraint Seat Position Sensor Replacement

Removal Procedure

1. Remove the seat from the vehicle. Refer to Driver or Passenger Seat Replacement [1][2]Driver or Passenger Seat Replacement.





2. Disconnect the electrical connector from the seat position sensor.





Warning

Eye protection must be worn when drilling rivets to reduce the chance of personal injury.

3. Drill out the rivets that retain the position sensor (1) to the seat adjuster track bracket.

4. Remove the position sensor from the seat adjuster track bracket.

Installation Procedure





1. Install the position sensor to the seat adjuster bracket.

2. Install the rivets that retain the position sensor (1) to the seat adjuster track bracket.

3. Connect the electrical connector to the position sensor.

4. Install the seat to the vehicle. Refer to Driver or Passenger Seat Replacement [1][2]Driver or Passenger Seat Replacement.