3. Counter Gear Shaft Disassemble

Counter Gear Shaft Disassemble

Special Tools

* J 22912-B - Rear Pinion and Axle Bearing Remover

* J 39473 - Mainshaft Bearing Installer

* J 39511 - Split Plate

* J 39547 - Press Adapter





Important: Do not replace tapered bearings unless inspection shows bearing damage.


1. Remove the small tapered bearing, using the J 22912-B - Rear Pinion and Axle Bearing Remover (1) with the J 39473 - Mainshaft Bearing Installer (2) and a hydraulic press.

2. Discard the small tapered bearing.




3. Remove the large tapered bearing, using the J 39511 - Split Plate (2), the J 39547 - Press Adapter (1), and a hydraulic press.

4. Discard the large tapered bearing.