Driver or Passenger Seat Replacement

Driver or Passenger Seat Replacement

Removal Procedure

Warning

When carrying a live inflator module, make sure the bag opening is pointed away from you. This minimizes the chance of injury in the case of an accidental deployment. Never carry the inflator module by the wires. Never carry the inflator module by the connector on the underside of the module.

Make sure that the bag and trim cover are facing up whenever you place a live inflator module on any surface. This is necessary to provide a free space for the bag to expand in the unlikely event of accidental deployment.

Never rest the steering column assembly on the steering wheel with the inflator module face down, and the column vertical. This may result in personal injury.

Warning: Refer to SIR Warning SIR Warning.

1. Disable the supplemental inflatable restraint (SIR) system. Refer to SIR Disabling and Enabling Service and Repair.
2. Disconnect the seat belt from the seat belt tensioner. Refer to Front Seat Belt Anchor Plate Tensioner Replacement Front Seat Belt Anchor Plate Tensioner Replacement




3. Unscrew the 2 bolts (1).
4. Release and disconnect the wiring harness plug (3) front seat.
5. Remove the front seat (4) from the guide in front.

Installation Procedure




1. Perform the front seat track synchronization. Refer to Front Seat Track Synchronization Front Seat Track Synchronization.
2. Install the front seat (4) to the guide in front.
3. Connect and latch the wiring harness plug (3) front seat.

Caution: Refer to Fastener Caution Fastener Caution.

4. Install the 2 bolts (1) and tighten to 45 Nm (33 lb in) Tighten the.
5. Connect the seat belt from the seat belt tensioner. Refer to Front Seat Belt Anchor Plate Tensioner Replacement Front Seat Belt Anchor Plate Tensioner Replacement
6. Enable the SIR system. Refer to SIR Disabling and Enabling Service and Repair.