73. Engine Oil Cooler Housing Installation

Engine Oil Cooler Housing Installation (LDE, LED, LFJ, LXV, 2H0, LUW, LFH)

1. Clean the engine oil cooler housing to thermostat housing sealing surfaces.
2. Install 2 NEW gaskets.




3. Install the engine oil cooler inlet pipe (3).
4. Install the engine oil cooler housing (1) and the 5 engine oil cooler bolts (2) and tighten to 25 Nm (18 lb ft).




5. Install the thermostat housing coolant pipe (2) to the engine oil cooler housing.
6. Install the 2 thermostat housing coolant pipe bolts (1) and tighten to 8 Nm (71 lb in).