80. Crankshaft Front Oil Seal Installation

Crankshaft Front Oil Seal Installation

Special Tools

EN-6351 - Mounting Sleeves

For equivalent regional tools, refer to Special Tools Special Tools.




1. Clean the sealing surfaces.
2. Slide the EN-6351 - sleeves (2) protective sleeve onto the crankshaft journal.
3. Slide the crankshaft front oil seal (1) over the protective sleeve on the crankshaft journal.




4. Remove the protective sleeve, and using the EN-6351 - sleeves (3), press the seal ring into the pump housing.
5. Use the crankshaft drive gear bolt (1) and washer (2) to press in the crankshaft front oil seal.