2. Crankshaft Balancer Removal

Crankshaft Balancer Removal

Special Tools

* EN-38122-A - Crankshaft Balancer Holder

* EN-43653 - Flywheel Holding Tool

For equivalent regional tools, refer to Special Tools Special Tools.





Note:
EN-43653 - flywheel holding toolmay be used instead of EN-38122-A - crankshaft balancer holderto prevent crankshaft rotation.

1. Install EN-38122-A - holder.

2. Remove the balancer retaining bolt and washer. Use EN-38122-A - holderand a breaker bar to prevent the crankshaft from rotating when loosening the bolt. Discard the bolt.





3. Remove the crankshaft balancer assembly using a universal removal tool.