Transmission Control Replacement

Transmission Control Replacement

Removal Procedure





2. Unlock shift lever and selector lever cable adjust locks (2).

3. Clip shift lever and selector lever cable (3) out of transmission control lever housing (1).





4. Remove the four transmission control lever fasteners (1).

5. Remove the transmission control (2).

Installation Procedure





1. Install the NEW transmission control (2).

Caution:
Refer to Fastener Caution Fastener Caution.

2. Install the four transmission control lever fasteners (1) and tighten to 8 Nm (71 lb in).





Note:
Do not lock yet.

3. Slide shift lever and selector lever cable into shift lever and selector lever cable adjust locks (2).

4. Clip shift lever and selector lever cable (3) into transmission control lever housing (1).

5. Adjust shift lever and selector lever cable.