Drum Brake Hardware Replacement (J93, J94)

Drum Brake Hardware Replacement (J93, J94)

Removal Procedure

Warning:
Refer to Brake Dust Warning Brake Dust Warning.


1. Raise and support the vehicle. Refer to Lifting and Jacking the Vehicle Service and Repair.

2. Remove the tire and wheel assembly. Refer to Tire and Wheel Removal and Installation Service and Repair.

3. Remove the brake drum. Refer to Brake Drum Replacement (J93, J94) Removal and Replacement.





4. Remove the upper brake shoe return spring (1).





5. Remove brake shoe adjuster (1).





6. Remove the brake shoe adjuster actuator lever (1).





7. Remove the brake shoe hold down spring and cup assemblies (1) by compressing the spring and rotating the assembly 1/4 turn.





8. Remove the hold down spring and cup assembly pins (1).





9. Spread the top of the brake shoe assembly (1) and lift the assembly over the wheel hub.

10. Release the park brake actuator lever from the park brake cable eyelet.





11. Remove the lower brake shoe return spring (1).

12. Inspect the drum brake hardware and replace any components, as necessary. Refer to Drum Brake Hardware Inspection Drum Brake Hardware Inspection.

Installation Procedure

1. Clean the drum brake backing plate of any dirt and debris.

2. Apply a light coat of high temperature brake lubricant to the brake drum backing plate shoe contact surfaces.





3. Install the lower brake shoe return spring (1).





4. Install the park brake actuator lever to the park brake cable eyelet.

5. Spread the top of the brake shoe assembly (1) and lift the assembly over the wheel hub.

6. Position the brake shoe assembly to the drum brake backing plate.





7. Install the hold down spring and cup assembly pins (1).





8. Install the brake shoe hold down spring and cup assemblies (1) by compressing the spring and rotating the assembly 1/4 turn.





9. Install the brake shoe adjuster actuator lever (1).





10. Install brake shoe adjuster (1).





11. Install the upper brake shoe return spring (1).

12. Adjust the drum brakes. Refer to Drum Brake Adjustment Adjustments.

13. Install the brake drum. Refer to Brake Drum Replacement (J93, J94) Removal and Replacement.

14. Install the tire and wheel assembly. Refer to Tire and Wheel Removal and Installation Service and Repair.