22. Crankshaft Front Oil Seal Removal

Crankshaft Front Oil Seal Removal

Special Tools

EN-45000 - Remover

For equivalent regional tools, refer to Special Tools Special Tools.





Caution:
Clean the crankshaft sealing surface with a clean, lint-free towel. Inspect lead-in edge of crankshaft for burrs/sharp edges that could damage the rear main oil seal. Remove burrs/sharp edges with crocus cloth before proceeding.

Using the EN-45000 - remover (3), remove the crankshaft front oil seal (1) from the crankshaft (2).