82. Timing Belt Rear Cover Installation

Timing Belt Rear Cover Installation

1. Re-cut the 4 rear timing belt cover threads.




2. Install the timing belt rear cover (1).

Caution: Refer to Fastener Caution Fastener Caution.

Note: Service may offer bolts that are not microencapsulated. If this is the case apply thread lock agent to the bolt. If fastener is microencapsulated, install a NEW 4 timing belt rear cover bolts. DO NOT reuse the old bolt.

3. Install the 4 NEW timing belt rear cover bolts (2) and tighten to 6 Nm (53 lb in).