86. Timing Belt Idler Pulley Installation

Timing Belt Idler Pulley Installation

Special Tools

EN-45059 - Angle Meter

For equivalent regional tools, refer to Special Tools Special Tools.





Caution: Refer to Fastener Caution Fastener Caution.

Caution: Refer to Torque-to-Yield Fastener Caution Torque-to-Yield Fastener Caution.

1. Re-cut the timing belt idler pulley thread.

2. Install the timing belt idler pulley (2) and tighten the NEW timing belt idler pulley bolt (1) a first pass to 20 Nm (15 lb ft).

3. Tighten the NEW timing belt idler pulley bolt a second pass to an additional 120 degrees, using the EN-45059 - meter.

4. Tighten the NEW timing belt idler pulley bolt a final pass to an additional 15 degrees, using the EN-45059 - meter.