95. Power Steering Pump Belt Installation

Power Steering Pump Belt Installation

Special Tools

EN-50098 - Belt Installer

For equivalent regional tools, refer to Special Tools Special Tools.





1. Install EN-50098 - installer (2) and a NEW power steering pump belt (1) to water pump pulley and power steering pump pulley.

2. Turn the engine slowly clockwise at the crankshaft balancer bolt.

3. During turn the engine take care of the proper installation of the power steering pump belt to the water pump pulley (3).

4. Remove the EN-50098 - installer (2).

5. Check the power steering pump belt is installed clearly.