Steering Control Module: Testing and Inspection

Power Steering Control Module Programming and Setup

The following service procedures require either a programming or a setup event performed for a complete repair.

Power Steering Control Module Replacement

If the power steering control module needs to be replaced, the following procedures must be performed:

1. Connect a scan tool to the vehicle and access SPS. Refer to Service Programming System (SPS) Service Programming System (SPS).

2. Perform the SPS function Electronic Power Steering - Prepare Control Module for Removal and follow the on-screen instructions.

3. Perform the SPS function Electronic Power Steering - Programming and follow the on-screen instructions.

4. Perform the SPS function Electronic Power Steering - Setup and follow the on-screen instructions.

5. Clear DTCs after completing the programming procedure.

Power Steering Control Module Reprogramming

Do not reprogram the power steering control module unless directed by a service procedure or a service bulletin.

1. Connect a scan tool to the vehicle and access SPS. Refer to Service Programming System (SPS) Service Programming System (SPS).

2. Perform the SPS function Electronic Power Steering - Programming and follow the on-screen instructions.

3. Clear DTCs after completing the programming procedure.