Extension Disassemble

Extension Disassemble

Special Tools

* DT-47722 - Shift Shaft Seal Installer

* J 2619-01 - Slide Hammer

* J 26941 - Bushing and Bearing Remover 3-4 in

For equivalent regional tools, refer to Special Tools Aisin AY6 - Manual Transmission.





Note:
The extension must be held down firmly to remove the output shaft seal.

1. Using J 2619-01 - slide hammer (1) and J 26941 - remover (2) , remove the rear output shaft seal (92).





Note:
The extension must be held down firmly to remove the output shaft bearing.

2. Using J 2619-01 - slide hammer (1) and J 26941 - remover (2) , remove the rear output shaft bearing assembly (89).





3. Using tool DT-47722 - seal installer, remove the shift shaft seal (88).