Adjust Link Replacement

Adjust Link Replacement

Removal Procedure

1. Raise and support the vehicle. Refer to Lifting and Jacking the Vehicle Service and Repair

2. Remove the tire and wheel assembly. Refer toTire and Wheel Removal and Installation Removal and Replacement.




3. Loosen the adjust link jam nut (1).




4. Remove the adjust link nut (1).




5. Remove the adjust link (1) from the tie rod end and the rear suspension support.

Installation Procedure




1. Install the adjust link (1) to the tie rod end and the rear suspension support.





Caution: Refer to Fastener Caution Fastener Caution.

2. Install the adjust link nut (1) and tighten to 80 Nm (59 lb ft).




3. Tighten the adjust link jam nut (1) to 65 Nm (48 lb ft).

4. Install the tire and wheel assembly. Refer toTire and Wheel Removal and Installation Removal and Replacement.

5. Inspect the rear wheel alignment. Refer to Wheel Alignment Measurement Wheel Alignment Measurement.