Overhaul Procedure Steps

NOTE: This article lists the sequential steps necessary to overhaul the transmission.
^ For the specific step listed below, refer to that step under "Repair Instructions". Repair Instructions


1. Transmission Disassemble
2. Main Shaft and Input Shaft Disassemble
3. Counter Gear Shaft Disassemble
4. Synchronizers Disassemble
5. Synchronizers Cleaning and Inspection
6. Synchronizers Assemble
7. Shift Shaft and Fork Assemblies Disassemble
8. Shift Shaft and Fork Assemblies Cleaning and Inspection
9. Shift Shaft and Fork Assemblies Assemble
10. Transmission Case and Adapter Disassemble
11. Transmission Case and Adapter Cleaning and Inspection
12. Transmission Case and Adapter Assemble
13. Extension Disassemble
14. Extension Cleaning and Inspection
15. Extension Assemble
16. Bearings and Spacers Cleaning and Inspection
17. Gears Cleaning and Inspection
18. Counter Gear Shaft Assemble
19. Main Shaft and Input Shaft Assemble
20. Transmission Assemble
21. Shimming Procedures