Floor Carpet Retainer Replacement (Saxonia)

Floor Carpet Retainer Replacement (Saxonia)

Removal Procedure

Warning

Wear safety glasses in order to avoid eye damage.

1. Remove the front floor panel carpet. Refer to Front Floor Panel Carpet Replacement Front Floor Panel Carpet Replacement.





2. Remove the upper part of the floor carpet retainer (1) with a suitable tool. Remove the remaining pieces through the cutout in the floor panel carpet.

Installation Procedure





1. Align the lower part of the floor panel carpet retainer to the cutout in the carpet. Turn over the carpet, while maintaining the center position of the retainer.

2. Position the upper part of the retainer (1) aligning to the lower part of the retainer. Hold the lower part of the retainer with a suitable tool and push down hard on the upper part of the retainer to engage several retention rings.

3. While still holding the lower part of the retainer, lightly tap on the upper part of the retainer using a rubber mallet to engage the remaining retention rings.

4. Install the front floor panel carpet. Refer to Front Floor Panel Carpet Replacement Front Floor Panel Carpet Replacement.