Engine Oil Cooler Outlet Hose Replacement

Engine Oil Cooler Outlet Hose Replacement

Removal Procedure

1. Disconnect battery negative cable. Refer to Battery Negative Cable Disconnection and Connection Battery Negative Cable Disconnection and Connection

2. Drain engine coolant. Refer to Cooling System Draining and Filling (Static Fill) Cooling System Draining and Filling (Static Fill)Cooling System Draining and Filling (GE-47716 Fill) Cooling System Draining and Filling (GE-47716 Fill)

3. Remove the air cleaner outlet duct. Refer to Air Cleaner Outlet Duct Replacement Air Cleaner Outlet Duct Replacement





4. Remove the oil cooler outlet hose clamp (2).

5. Remove the oil cooler outlet hose (3) from the thermostat housing (1).

6. Remove the warm up three way catalytic converter. Refer to Warm Up Three-Way Catalytic Converter Replacement Warm Up Three-Way Catalytic Converter Replacement





7. Remove the oil cooler outlet pipe bolt (1) from the engine block.

8. Remove the oil cooler outlet pipe (2) in compound with the oil cooler outlet hose.

9. Remove the oil cooler outlet hose clamp.

10. Remove the oil cooler outlet hose from the oil cooler outlet pipe.

Installation Procedure

1. Install the oil cooler outlet hose to the oil cooler outlet pipe.

2. Install the oil cooler outlet hose clamp.





3. Install the oil cooler outlet pipe (2) in compound with the oil cooler outlet hose to the oil cooler.

4. Install the oil cooler outlet pipe bolt (1) to the engine block and tighten to 10 Nm (89 lb in).

5. Install the warm up three way catalytic converter. Refer to Warm Up Three-Way Catalytic Converter Replacement Warm Up Three-Way Catalytic Converter Replacement





6. Install the oil cooler outlet hose (3) to the thermostat housing (1).

7. Install the oil cooler outlet hose clamp (2).

8. Install the air cleaner outlet duct. Refer to Air Cleaner Outlet Duct Replacement Air Cleaner Outlet Duct Replacement

9. Install the turbocharger oil feed pipe and the exhaust manifold heat shield. Refer to Turbocharger Oil Feed Pipe Replacement

10. Connect battery negative cable. Refer to Battery Negative Cable Disconnection and Connection Battery Negative Cable Disconnection and Connection

11. Fill engine coolant. Refer to Cooling System Draining and Filling (Static Fill) Cooling System Draining and Filling (Static Fill)Cooling System Draining and Filling (GE-47716 Fill) Cooling System Draining and Filling (GE-47716 Fill)