Engine Oil Cooler Outlet Pipe Replacement

Engine Oil Cooler Outlet Pipe Replacement

Removal Procedure

1. Remove the exhaust manifold. Refer to Exhaust Manifold Replacement Service and Repair.

2. Drain the cooling system. Refer to Cooling System Draining and Filling (Static Fill) Cooling System Draining and Filling (Static Fill)Cooling System Draining and Filling (GE-47716 Fill) Cooling System Draining and Filling (GE-47716 Fill).





3. Remove the 2 engine oil cooler outlet pipe bolts (1).

4. Remove the engine oil cooler outlet pipe (2) from the engine oil cooler housing and the engine coolant thermostat housing.

5. Remove the 2 engine oil cooler outlet pipe gaskets.

Installation Procedure

1. Clean the engine oil cooler outlet pipe sealing surfaces.

2. Install the 2 NEW engine oil cooler outlet pipe gaskets.





3. Install the engine oil cooler outlet pipe (2) to the engine oil cooler housing and the engine coolant thermostat housing.

Caution:
Refer to Fastener Caution Fastener Caution.

4. Install the 2 engine oil cooler outlet pipe bolts (1) and tighten to 8 Nm (71 lb in).

5. Fill the cooling system. Refer to Cooling System Draining and Filling (Static Fill) Cooling System Draining and Filling (Static Fill)Cooling System Draining and Filling (GE-47716 Fill) Cooling System Draining and Filling (GE-47716 Fill).

6. Install the exhaust manifold. Refer to Exhaust Manifold Replacement Service and Repair.