Timing Belt Idler Pulley Installation

Timing Belt Idler Pulley Installation

Special Tools

EN-45059 - Angle Meter

For equivalent tools, refer to Special Tools Special Tools.





Caution: Refer to Fastener Caution Fastener Caution.

Caution: Refer to Torque-to-Yield Fastener Caution Torque-to-Yield Fastener Caution.

1. Install the timing belt idler pulley (1) and tighten the NEW bolt (2) in three passes use the EN-45059 - meter:

1. First pass tighten to 20 Nm (15 lb ft).

2. Second pass to 120 degrees.

3. Final pass to 15 degrees.

2. Install the timing belt. Refer to Timing Belt Replacement Service and Repair.