Timing Belt Tensioner Installation

Timing Belt Tensioner Installation

Special Tools

EN-45059 - Angle Meter




1. Clean the timing belt tensioner thread.

2. Install the timing belt tensioner (2).

Caution: Refer to Fastener Caution Fastener Caution.

Caution: Refer to Torque-to-Yield Fastener Caution Torque-to-Yield Fastener Caution.

3. Install a NEW timing belt tensioner bolt (1) and tighten the bolt in 3 passes using the EN-45059 - meter.

1. First pass to 20 Nm (15 lb ft).

2. Second pass to an additional 120 degrees.

3. Final pass to an additional 15 degrees.