HVAC - Automatic

Heater and Blower and Air Conditioning Control Module Replacement

Removal Procedure

1. Remove instrument panel compartment. Refer to Instrument Panel Compartment Replacement Instrument Panel Compartment Replacement.

2. Remove floor air outlet duct right side. Refer to Floor Air Outlet Duct Replacement - Right Side Floor Air Outlet Duct Replacement - Right Side.





3. Remove the 2 heater and blower and air conditioning control module bolts (1) and the heater and blower and air conditioning control module wiring harness plug (2).

4. Remove heater and blower and air conditioning control module (3).

Installation Procedure





1. Install heater and blower and air conditioning control module (3).

Caution:
Refer to Fastener Caution Fastener Caution.

2. Install the heater and blower and air conditioning control module wiring harness plug (2) and the 2 heater and blower and air conditioning control module bolts (1). Tighten to 2.5 Nm (23 lb in).

3. Install floor air outlet duct - right side. Refer to Floor Air Outlet Duct Replacement - Right Side Floor Air Outlet Duct Replacement - Right Side.

4. Install instrument panel compartment. Refer to Instrument Panel Compartment Replacement Instrument Panel Compartment Replacement.