Transmission Mount Replacement - Left Side

Transmission Mount Replacement - Left Side

Removal Procedure

1. Remove battery tray. Refer to Battery Tray Replacement Service and Repair.

2. Raise vehicle. Refer to Lifting and Jacking the Vehicle Service and Repair.

3. Install the engine support fixture. Refer to Engine Support Fixture Engine Support Fixture for the 1.4L engine or Engine Support Fixture Engine Support Fixture for the 1.8L engine.

4. Lower vehicle.





5. Remove and DISCARD 3 transmission mount bolts (1).





6. Remove 2 transmission mount bolts (1, 3) and transmission mount nut (2).





7. Remove transmission mount (1).

Installation Procedure





1. Install transmission mount (1).





Caution:
Refer to Fastener Caution Fastener Caution.

2. Install 2 transmission mount bolts (1, 3) and tighten to 62 Nm (46 lb ft).

3. Install transmission mount nut (2) and tighten to 62 Nm (46 lb ft).





Caution:
Refer to Torque-to-Yield Fastener Caution Torque-to-Yield Fastener Caution.

4. Install 3 NEW transmission mount bolts (1) and tighten to 50 Nm (37 lb ft) plus 60-75 degrees.

5. Raise vehicle.

6. Remove the engine support fixture.

7. Lower vehicle.

8. Install battery tray. Refer to Battery Tray Replacement Service and Repair.