Transmission Rear Mount Replacement

Transmission Rear Mount Replacement

Removal Procedure

1. If equipped with Electronic Power Steering, remove the steering gear. Refer to Steering Gear Replacement Steering Gear Replacement.

2. Remove the transmission rear mount bracket. Refer to Transmission Mount Bracket Replacement - Rear Transmission Mount Bracket Replacement - Rear.




3. Remove the 2 transmission rear mount nuts (3) and the 2 transmission rear mount bolts (1).

4. Remove the transmission rear mount (2).

Installation Procedure




1. Install the transmission rear mount (2).

2. Install the 2 transmission rear mount bolts (1).

Caution: Refer to Fastener Caution Fastener Caution.

3. Install the 2 transmission rear mount nuts (3) and tighten to 110 Nm (82 lb ft).

4. Install the transmission rear mount bracket. Refer to Transmission Mount Bracket Replacement - Rear Transmission Mount Bracket Replacement - Rear.

5. If equipped with Electronic Power Steering, install the steering gear. Refer to Steering Gear Replacement Steering Gear Replacement.