Camshaft Removal - Right Side

Camshaft Removal - Right Side




1. Observe the markings on the bearing caps. Each bearing cap is marked in order to identify its location. The markings have the following meanings:

* The raised feature must always be oriented toward the center of the cylinder head.

* The I indicates the intake camshaft.

* The E indicates the exhaust camshaft.

* The number indicates the journal position from the front of the engine.




2. Remove the camshaft bearing cap bolts.

3. Remove the camshaft bearing caps.





Important: Mark the camshafts upon removal to ensure installation is in the correct position.


4. Remove the camshafts.