Application Malfunction

Application Malfunction

Diagnostic Instructions

* Perform the Diagnostic System Check - Vehicle Diagnostic System Check - Vehicle prior to using this diagnostic procedure.

* Review Strategy Based Diagnosis Strategy Based Diagnosis for an overview of the diagnostic approach.

* Diagnostic Procedure Instructions Diagnostic Procedure Instructions provide an overview of each diagnostic category.

Circuit/System Description

The term application refers to any piece of software that works on a system (hardware) that is being operated by it's own software. Applications are typically small software programs which uses the hardware to perform a specific task, as opposed to operating the entire system.

Diagnostic Aids

* For an application to be used, it must be installed on both the vehicle infotainment system and a compatible mobile device.

* The application must work correctly on the device to work with the vehicle infotainment system.

* The user may be required to log-in to the application on the mobile device before using the application from the vehicle controls.

* Applications use the mobile device and connection to a service provider to operate. Connection quality issues, or service provider data transmission issues can give the appearance of a vehicle malfunction.

* The device must be connected to the system. This may be done wirelessly via Bluetooth (R), or via the vehicle USB port.
When a mobile device is connected via Bluetooth(R), some or all of the device controls may be unavailable from the radio controls. This varies dependant upon the device being used. Refer to the vehicle owners manual, supplements, and the device manufacturers information for information on devices,
control, and operation.

Refer to the device manufacturers information for the preferred connection method.

* The device must be unlocked, and any additional applications should be closed.

* If the device has any sound enhancement features such as noise reduction or echo control, these features should be turned off.

* A low battery condition in the mobile device may not allow the device to connect to the system, or can create communication issues with the device. Verify the device battery state of charge and re-charge or replace as needed.

* If a ‘Please See Device' or similar type error message is displayed, this may indicate the device has lost it's connection to the vehicle, or the device has lost it's external data connection.

* If a cable is used for connection, attempt to connect the device using a different cable; cables can deteriorate over time or become damaged.

Reference Information

Schematic Reference

Radio/Navigation System Schematics Radio/Navigation System Schematics

Connector End View Reference

Component Connector End Views Fuel Pump and Level Sensor Assembly

Description and Operation

Radio/Audio System Description and Operation Radio/Audio System

Electrical Information Reference

* Circuit Testing Circuit Testing

* Connector Repairs Connector Repairs

* Testing for Intermittent Conditions and Poor Connections Testing for Intermittent Conditions and Poor Connections

* Wiring Repairs Wiring Repairs

Scan Tool Reference

Control Module References Control Module References for scan tool information

Circuit/System Verification

1. Verify the application is installed on the mobile device and is up to date.

• If the application is not installed or is not up to date.
Install or update the application on the device.

• If the application is installed on the mobile device and is up to date

2. Verify the application operates correctly on the mobile device.

• If the application is not operating correctly on the mobile device.
Refer to the application website.

• If the application is operating correctly on the mobile device.

3. Verify the radio calibrations are current.

• If the radio calibrations are not current
Reprogram the radio and re-evaluate the concern.

• If no update calibrations are available

4. Verify the application is installed on the radio and is up to date.

• If the application is not installed or is not up to date.
Install or update the application on the radio.

• If the application is installed on the radio and is up to date

5. Ignition ON, radio ON.

6. Verify the mobile device can connect to the infotainment system. Refer to the owners manual for information on the preferred connection method for the device.

• If the mobile device cannot connect to the vehicle infotainment system.

* If unable to connect via Bluetooth, refer to Bluetooth Malfunction (Radio - With UH7) Bluetooth Malfunction (Radio - With UH7)Bluetooth Malfunction (Radio - Without UH7) Bluetooth Malfunction (Radio - Without UH7)Bluetooth Malfunction (OnStar) Bluetooth Malfunction (OnStar).

* If unable to connect via USB, refer to Auxiliary Audio Input Malfunction Auxiliary Audio Input Malfunction.

• If the mobile device connects to the vehicle infotainment system.

7. Launch the application.

8. Verify the applications operates properly with the vehicle infotainment system.

• If the application does not function properly
Refer to diagnostic aids.

• If the application functions properly

9. All OK.

Repair Instructions

Perform the Diagnostic Repair Verification Verification Tests after completing the repair.

Control Module References Control Module References for radio replacement, programming, and setup.