Steering Control Module: Testing and Inspection

Power Steering Control Module Programming and Setup

The following service procedures require either a programming or a setup event performed for a complete repair.

Power Steering Control Module Replacement

If the steering column power steering control module needs to be is replaced, the power steering control module needs to be programmed with the following procedures:

1. Connect a scan tool to the vehicle and access SPS. Refer to Service Programming System (SPS) Service Programming System (SPS).

2. Perform the SPS function Power Steering Control Module - Programming and follow the on-screen instructions.

3. Clear DTCs after completing the programming procedure.

Power Steering Control Module Reprogramming

Do not reprogram the power steering control module unless directed by a service procedure or a service bulletin.

1. Connect a scan tool to the vehicle and access SPS. Refer to Service Programming System (SPS) Service Programming System (SPS).

2. Perform the SPS function Power Steering Control Module - Programming and follow the on-screen instructions.

3. Clear DTCs after completing the programming procedure.