Operation CHARM: Car repair manuals for everyone.

Fuel Filter: Service and Repair

In-Line Fuel Filter:






WARNING: To reduce the risk of fire and personal injury when the fuel line is disconnected, cover the fuel line with a shop cloth to collect the fuel, and then place the cloth in an approved container.

REMOVAL:

1. Raise vehicle on hoist.
2. Disconnect the fuel lines from the filter.
NOTE: Use a back-up wrench to prevent filter, "O" ring, or fuel line damage.

3. Remove the filter from the car.

INSTALLATION:

1. Install the new filter in position loosely.
2. Using new "O" rings, install the fuel lines into the filter.
NOTE: Use a back-up wrench to prevent filter, "O" ring, or fuel line damage.
3. Torque line fittings to specification 30 Nm (22 lb.ft).
4. Secure the filter to the vehicle.
5. Lower the vehicle.
6. START the engine and inspect for leaks.

NOTE: Refer to FUEL PUMP/FUEL GAUGE SENDING UNIT for fuel strainer removal.