Srta Processing Procedures:

Figure 1:

Each SRTA unit will be shipped in a container which must be used for core return of the original 3L80/3L80-HD assembly to your GMSPO Parts Distribution Center. A SRTA Information Packet is included with each SRTA unit. The contents of this envelope are to be removed and used as described with each illustration.

Figure 2:

SRTA PROCESSING PROCEDURES - INFORMATION PACKET:

The contents of this envelope include Limited Warranty Information, Dealer Product Feedback Form, Core Exchange Return Procedure, and a pre-addressed return mailing envelope. A dealer representative is to explain all warranty information contained in this envelope to the customer.

Figure 3:

SRTA PROCESSING PROCEDURES - CORE EXCHANGE RETURN:

The core return procedure provides detailed instructons for the GM dealer on handling of the SRTA and original 3L80/3L80-HD units. This sheet can be discarded after use.

Figure 4:

SRTA PROCESSING PROCEDURES - FAILURE ANALYSIS INFORMATION:

This Product Feedback Form is to be completed by the service manager and/or technician. Fill out this form as completely as possible to provide information which can be used for analysis. This valuable input can result in future product refinement through corrective action. Insert the white copy of the completed form and a copy of the repair order into the SRTA Information Packet envelope, reseal the envelope and wire tag it to the bell housing of the unit being returned for core exchange. Return the yellow copy of the completed Product Feedback Form, using the postpaid envelope, to Hydra-matic Division.