Hardware

Front Door Window Regulator Handle:

TOOL REQUIRED:
J-9886-O1, Door Handle Remover.

REMOVE OR DISCONNECT
1. Window regulator handle.
^ Insert J-9886-O1 between the handle and the bearing plate.
^ Align the tool parallel with the door handle, and push to disengage the clip.
^ Pull the handle from the door.
2. Bearing plate.

INSTALL OR CONNECT
1. Bearing plate.
2. Window regulator handle.
^ Place the window in the raised position.
^ Put the clip onto the handle,
^ Insert the handle onto the door so the handle is pointing towards the front of the door.
^ Push on the handle until the clip engages the window regulator shaft.