Service Procedure

FIGURE 1 - HIGH BACK BUCKET SEAT BELT COMPONENTS - SUBURBAN:

Remove or Disconnect as follows (Figure 1):

1. Upper seat belt anchor plate cover (42). Pry the top of the cover away from anchor plate.

2. Anchor plate bolt (36).

3. Anchor plate (35).

4. Retractor (44) to floor bolt (47).

5. Retractor (44) from vehicle.

6. Plug (51).

7. Buckle (43) to floor bolt (50).

8. Seat belt wire (41).

9. Buckle (43) from floor.

Install or Connect P/N 15583507 as follows (Figure 1) :

1. Buckle (43) to floor.

2. Seat belt wire (41).

3. Buckle (43) to floor bolt (50).

Tighten: Bolt (50) to 50 N-m (37 ft.lbs.)

4. Plug (51).
5. Retractor (44) to the vehicle.

6. Retractor (44) to floor bolt (47).

Tighten: Bolt (47) to 50 N-m (37 ft.lbs.)

7. Anchor Plate (35).

8. Anchor plate bolt (36).

Tighten: Bolt (36) to 50 N-m (37 ft.lbs.)

9. Upper seat belt anchor plate cover (42).

10. Install campaign Identification Label.