Troubleshooting Hints

1. Check LO Beam Lamps and HI Beam Lamps for damage to the filament or bulb.
2. Check Fusible Link Y for damage.
3. If a LO Beam Lamp or HI Beam Lamp has been found damaged and an unusually high amount of moisture is noticeable in the Headlamp Capsule, check the Vent Tube and Drain Tube for restriction. Small amounts of moisture are normally found in the Headlamp Capsule, however, excessive moisture can damage the lamps.
4. Check the LH and RH Headlamp Capsule connectors to be sure the connector seal is not damaged or missing.

CAUTION: Halogen bulbs contain a gas under pressure. Handling the bulb improperly could cause it to shatter into flying glass fragments. To help avoid personal injury:
^ Turn "OFF" the Light Switch and allow bulb to cool before changing bulbs. Leave the Switch "OFF" until bulb change is complete.
^ Always wear eye protection when changing a halogen bulb.
^ Handle the bulb only by its base. Avoid touching the glass.
^ Do not drop or scratch the bulb. Keep moisture away.
^ Place the used bulb in the bulb's carton and dispose of it properly. Keep halogen bulbs out of reach of children.