Troubleshooting Hints - Exterior Lights

1. If neither the Turn Lamps or Backup Lamps work, check the TURN B/U Fuse.
2. If neither the Stoplamps nor Hazard Lamps work, check the STOP-HAZ Fuse.
3. If one of the Turn Indicators goes on when the Park Lamps are turned on, check the Front Park/Turn Lamp on that side.
4. If Turn Lamps stay on (do not flash) in both "LEFT" Turn and "RIGHT" Turn, replace the Turn Flasher.
5. For any of the following symptoms replace the Turn/Hazard Switch:
^ All Turn/Hazard/Stoplamps do not work and C206 is firmly mated.
^ Some Turn Lamps work and all Hazard Lamps work.
^ Some Hazard Lamps work and all Turn Lamps work.
^ Hazard Lamps do not turn off.
6. If Hazard Lamps stay on (do not flash) in "HAZARD," but Stoplamps operate normally, replace the Hazard Flasher.
7. If Stoplamps do not turn off, adjust/replace the Stoplamp Switch.
8. If a Turn Indicator does not light but the Turn Signal works, check the bulb, connections and wiring to the Indicator.
9. If only one lamp does not operate, check the lamp, socket and related wiring for opens or corrosion.
10. With Daytime Running Lamps (DRL), if Parking Lamps stay on and Headlights stay at full intensity, with daylight conditions, check for an obstruction covering the DRL Sensor.