Clearing Diagnostic Trouble Codes

CLEARING DIAGNOSTIC TROUBLE CODES (DTCs)
To clear the TCCM DTC memory, proceed as follows:
1. Turn the ignition off.
2. Remove the 5-amp TCCM fuse.
3. Wait at least 2 minutes and 30 seconds then replace the fuse.
4. Cycle the ignition on and off five times.

IMPORTANT:

The DTCs do not clear if the 5-amp TCCM fuse is not removed for at least 2 minutes and 30 seconds.

DTC number 1 continues to occur until the ignition is cycled five times.