Auxiliary Generator Brace

Auxiliary Generator:

REMOVE OR DISCONNECT
1. The serpentine belt from the engine.
2. The mounting bolts from the brace.
3. The brace from the vehicle.
4. The idler pulley if necessary.

INSTALL OR CONNECT
1. The idler pulley if necessary.
2. The brace to the vehicle.
3. The mounting bolts to the brace.
Tighten
^ The auxiliary generator brace mounting bolts to:
- The long bolts to 50 N.m (37 lb ft).
- The short bolts to 25 N.m (18 lb ft).
4. The serpentine belt to the engine.