Headlamp Aiming Alternative Procedure

TOOLS REQUIRED
J253O-E Headlamp Aimer

1. Prepare the vehicle.
2. Make sure all of the components are in place, if other work has been completed on the vehicle.
3. Park the vehicle on a level surface.
4. Stop all of the other work on the vehicle.
5. Make sure the vehicle has one-half tank of fuel or less.
6. Close the doors.
7. Rock sideways the vehicle.
8. Make sure the headlamps are not illuminated.
9. Using the J25300-E, adjust the headlamps to the specifications required by the state and/or local authorities.
- Follow the instructions accompanying the tool for aiming the headlamps.
- The kit contains special adapters for use with the composite headlamps.