Overhaul Procedure Steps

NOTE: This article lists the sequential steps necessary to overhaul the engine.
^ For the specific step listed below, refer to that step under "Repair Instructions".
^ For the complete list of procedures, refer to "Repair Instruction". Repair Instructions


Repair Instructions:

[ ] Drive Belt Replacement
[ ] Engine Mount Inspection
[ ] Engine Mount Replacement (Right Side)
[ ] Engine Mount Replacement (Left Side)
[ ] Intake Manifold Replacement

[ ] Exhaust Manifold Replacement
[ ] Oil Level Indicator and Tube Replacement
[ ] Timing Belt Replacement
[ ] Timing Belt Tensioner Replacement
[ ] Valve Rocker Arm Cover Replacement

[ ] Camshaft Replacement
[ ] Valve Rocker Arm and Shaft Replacement
[ ] Cylinder Head Replacement
[ ] Oil Pan Replacement
[ ] Oil Pump Replacement

[ ] Piston, Connecting Rod, and Bearing Replacement
[ ] Crankshaft Bearing Replacement
[ ] Crankshaft Rear Oil Seal and Housing Replacement
[ ] Engine Flywheel Replacement
[ ] Engine Replacement

[ ] Engine Block Clean and Inspect
[ ] Engine Flywheel Balancing
[ ] Cylinder Head Disassemble
[ ] Oil Pump Disassemble