Headlamp Bulb: Service and Repair

REMOVAL PROCEDURE





CAUTION: Halogen bulbs contain gas under pressure. Handling a bulb improperly could cause it to shatter into flying glass fragments. To help avoid personal injury:
^ Turn oft the lamp switch and allow the bulb to cool before changing the bulb. Leave the lamp switch oft until the bulb change is complete.
^ Always wear eye protection when changing a halogen bulb.
^ Handle the bulb only by its base. Avoid touching the glass.
^ Do not drop or scratch the bulb.
^ Keep dirt and moisture oft the bulb.
^ Place the used bulb in the new bulb's carton and dispose of it properly.
^ Keep halogen bulbs out of the reach of children

1. Disconnect the headlamp bulb electrical connector.
2. Turn the lock ring (4) counterclockwise in order to loosen the headlamp bulb lock ring (4).
3. Pull the headlamp bulb (3) using the lock ring (4) from the headlamp assembly (2).
4. Save the lock ring (4) in order to reuse with the new bulb.

INSTALLATION PROCEDURE





1. Install the headlamp bulb (3) to the headlamp assembly (2).
2. Rotate the lock ring (4) clockwise in order to secure the headlamp bulb (3).
3. Connect the headlamp bulb electrical connector.