Troubleshooting Hints - Exterior Lights
1. For inoperative Parklamps:^ Check the TAIL DOME Fuse.
^ Check that Headlamp Relay 2 connector is secure.
^ Check for an open or shorted filament within the inoperative bulb.
^ Check that G100, G104, G200, G300, G400 and G402 (2-Door) are clean and tight.
2. For inoperative Turn/Hazard Lamps:
^ Check the HAZARD Fuse.
^ Check the TURN BACK Fuse.
^ Check that the Turn/Hazard Relay connector is secure.
^ Check for an open or shorted filament within the inoperative bulb.
^ Check that G100, G104, G200, G201, G202 and G300 are clean and tight.
3. For inoperative Stoplamps:
^ Check the STOP HORN Fuse.
^ Check that the Stoplamp Switch is properly adjusted.
^ Check for an open or shorted filament within the inoperative bulb.
^ Check that G300 and G400 are clean and tight.
4. Before component replacement, check for poor connections at related component and in-line harness connector terminal connections