Transfer Case Adapter Seal Replacement
REMOVAL PROCEDURE^ Tools Required
- J 6125-B Slide Hammer
- J 23129 Converter Housing Seal and Extension Housing Oil Seal Remover
1. Raise the vehicle. Support the vehicle.
2. Support the transmission with a suitable hydraulic jack.
3. Remove the transfer case from the vehicle. Refer to Transfer Case.
4. Remove the transfer adapter case seal (1) from the transfer adapter case using the J 23129 and the J 6125-B.
5. Inspect the transfer adapter case for cracks and other damage. Replace as necessary.
INSTALLATION PROCEDURE
^ Tools Required
- J 35538 Adapter Case Seal Installer
- J 36850 Transjel Transmission Assembly Lubricant
1. Apply a thin coat of J 36850 to the transfer adapter case sea[ surface.
2. Install the new transfer adapter case seal (1) into the transfer adapter case using a J 35538.
3. Apply J 36850 to the new transfer adapter case seal lip.
4. Install the transfer case into the vehicle.
5. Remove the hydraulic jack from under the transmission.
6. Lower the vehicle.