Speedometer Drive Gear Replacement

REMOVAL PROCEDURE





1. Remove the gearshift control lever from the gearshift lever case. Refer to Gearshift Control Lever Removal.
2. Remove the extension case from the transmission. Refer to Extension Case Removal.
3. Remove the following items from the main shaft:
^ The speedometer drive gear retaining ring (2).
^ Speedometer drive gear (1).

4. Inspect the speedometer drive gear for excessive wear or damage. Replace as necessary.

INSTALLATION PROCEDURE





1. Install the speedometer drive gear (1) into the main shaft; secure with the speedometer drive gear retaining ring (2).
2. Install the extension case to the transmission. Refer to Extension Case Installation.
3. Install the gearshift control lever into the gearshift lever case. Refer to Gearshift Control Lever Installation.