Seat Back Replacement - Rear

REMOVAL PROCEDURE



1. Remove the rear seat from the vehicle.




2. Unfasten the J-clip on the rear of the seat. Pull back the trim cover in order to expose the side seat back side bolts (1).
3. Remove the seat back side bolts from the seat back.
4. Remove the seat back from the seat.

INSTALLATION PROCEDURE



1. Position the seat back on the seat.

Notice: Refer to Fastener Notice in Cautions and Notices.

2. Install the seat back side bolts (1).

Tighten
Tighten the bolts to 35 N.m (26 lb ft).

3. Pull the trim cover over the seat. Fasten the J-clip.




4. Install the rear seat in the vehicle.