34. Crankshaft Balancer Clean and Inspect

1. Clean the crankshaft balancer (1) in solvent.

CAUTION: Wear safety glasses in order to avoid eye damage.

2. Dry the crankshaft balancer with compressed air.
3. Inspect the crankshaft balancer for the following:
^ Worn or damaged bolt hole thread(s)
^ Worn, grooved, or damaged hub seal surface - Minor imperfections on the hub seal surface may be removed with a polishing compound or fine grade emery cloth. - A crankshaft balancer hub seal surface with excessive scoring, grooves, rust, or other damage must be replaced.
^ Worn, chunking, or deteriorated rubber between the hub and pulley
^ Worn or damaged keyway (2)
4. Repair or replace the crankshaft balancer as necessary.