57. Intake Manifold Disassemble - Lower

1. Remove the oil fill tube, if required.





2. Remove the MAP sensor retainer nut.
3. Remove the MAP sensor retainer.
4. Remove the MAP sensor.





5. Disconnect the fuel injector regulator vacuum hose connection from the intake manifold fining.





6. Remove the fuel rail stud (1) and bolts (2, 3).
7. Remove the fuel rail.





8. Remove the coolant outlet housing bolts.
9. Remove the coolant outlet housing.
10. Remove the thermostat.





11. Remove the ECT sensor, if required.





12. Remove the thermostat bypass hose fitting, if required.