30. Cylinder Head Disassemble

^ Tool(s) Required
- J 8062 Valve Spring Compressor
- J 43184 Valve Spring Compressor Adapter
- J 36017 Valve Guide Seal Remover





Important: Ensure that the valve train components are kept together and identified in order for proper reinstallation in their original position.

Caution: Wear safety glasses in order to avoid eye damage.

1. Use the J 8062 and the valve spring adapter and compress the valve spring.





2. Remove the valve keepers.
3. Slowly release the J 8062 from the valve spring assembly.
4. Remove the retainer.
5. Remove the spring.
6. Remove the spring seats.





Notice: Do not damage the valve guide. Remove any burrs that have formed at the key groove by chamfering the valve stem with an oil stone or a file.

7. Remove the valve seal (2). Use the J 36017.





8. Remove the valve (2).
9. Remove the remaining valves.